Data Storage: Better Hard Drives Ready for Lift-Off
courtesy ScienceDaily –
The triangular mesh used to model the properties of a hard disk read/write head. The colors represent the pressure profile of the head; red indicates areas of high pressure. (Credit: Copyright 2013 A*STAR Data Storage Institute)
Aug. 31, 2013 — Operating a hard disk drive is as complex as keeping a superfast car on the road. Read/write heads within the hard disk must process a huge amount of data at high speed. Controlling the motion of the slider housing these heads is crucial: if the slider crashes, it could destroy the hard disk.Researchers at the A*STAR Data Storage Institute (DSI) in Singapore have now developed a computational algorithm for studying the properties of the slider in a hard drive that is faster than existing algorithms1. Instead of taking days to finish, dynamic simulations using the new algorithm take only an hour, notes Wei Hua from the research team. “It greatly improves our simulation and research abilities,” he adds.
A read head typically moves across the disk surface of a hard drive at more than 7,000 revolutions per minute. The flying height of this fast-moving head is as low as 2 nanometers from the surface of the disk, some 50,000 times less than the width of a human hair. Controlling this motion is not easy, notes Hua. “The slider housing the read/write head flies on the fast-rotating hard drive disk, owing to a very thin layer of air. This air bearing pushes the slider upward, while a suspension bearing pushes the slider down toward the disk.”
Thermal effects control the distance of the head to the surface when it is being pushed down. To understand these effects, and other factors that control disk and head movements at high speed, fine-grained computer simulations are necessary.
Hua and co-workers expanded the DSI’s ABSolution air bearing simulation software for faster and more precise modeling. Instead of dividing the hard drive slider into a structured rectangular mesh typically used to aid calculations, the researchers used an unstructured triangular mesh that accurately captures the geometry of the read/write head (see image). Moreover, the algorithm better implements the dynamic effects that occur in drive heads, meaning that overall the code works faster and more efficiently.
This modeling software should prove useful in the future development of drive heads, Hua notes. Modeling the interaction between the slider and the rest of the drive is also important. “Influences such as those from the air suspension and disk effects are now being considered,” he explains. Hua and co-workers will use the improved algorithm to model slider properties that were almost impossible to simulate using the previous versions.
Other social bookmarking and sharing tools:
Story Source:
The above story is based on materials provided by The Agency for Science, Technology and Research (A*STAR).
Note: Materials may be edited for content and length. For further information, please contact the source cited above.
Journal Reference:
- Wei Hua, Shengkai Yu, Weidong Zhou, Kyaw Sett Myo. A Fast Implicit Algorithm for Time-Dependent Dynamic Simulations of Air Bearing Sliders. Journal of Tribology, 2012; 134 (3): 031901 DOI: 10.1115/1.4006134
MLA
Note: If no author is given, the source is cited instead.
Thank you, TiA
Related articles
- Optimize hard disk to improve the performance of PC with PC speed Maximizer (pcoptimizationtools.wordpress.com)
- SSD Hard Disk (akiqureshi.wordpress.com)
- Hard Drives, Sparse Disks and FCPX – Bonus Crossing the 180 (daredreamermag.com)
- Achieve Crashed Mac Hard Drive Data Recovery (uflysoftstudio.wordpress.com)
TECH in AMERICA (TiA) 